JKY55 brick making machine

Product characteristic

JKY55/50-35 brick making machine is an extruding & shaping device for hollow brick production line. It is suitable for hollow bricks with highly ratios hole, sintering bricks highly contained fly ash, low plastic glues soil brick, as well as the production of gangue and shale bricks. It enjoys many advantages: structure novel, technique advanced, high extruding, big capacity, highly vacuum degree, so it can instead of imported equipment. It is controlled by air clutch and is sensitive, convenient and reliable. It has been named excellent product by national authority department. It is exported to Bangladesh, Sudan, Egypt and so on, and gaining the high appreciation. 

Operation and Precautions of JKY55/50-35 brick machine: 
1. This brick machine opening, core head, core rod should be replaced and adjusted in time. While they are abraded to some extent, the sizes of tile will be affected in clay brick production line.
2. The wearing parts should be repaired and replaced when they are abraded after a period of use, or the product quality and output will decline, such as reamers, stirring blades and mud pressing board.
3. When you want to stop the machine, stop feeding first, and then squeeze out the clay inside the machine, in order to avoid the overload at next startup. Don't reboot the machine if the air pressure is lower than 0.5MMpa. The friction plate is easily burnt if the air pressure is not enough in clay brick production line.
4. The machine and all the bolts should be stopped and checked after six to eight hours' work for the first time to make sure if there is looseness. If yes, fasten them in time. If the machine is stopped for more than one day, all the clay material should be squeezed and cleaned out, trying to avoid the damage by the dry clay.

Qt10-15 Fully Automatic Conrete Block Making Machine

Features:
1) Uses Germany Siemens PLC control system and Siemens Touch Screen.
    A. Visualization screen with easy operation;
    B. Is able to set up, update and amend the production perimeters, to maximize the production output;
    C. Dynamic display of the systems status, automatic trouble shooting and warning notice;
    D. Has automatic-locking function, avoiding mechanical accidents caused by operational mistakes;
    E. Is able to troubleshoot the machinery via teleservice...
2) Uses high-dynamic proportional and directional valves, which automatically adjust the oil flow and pressure as per specific working requirements, to buffer the hydraulic cylinder when working; Uses integrated high-pressure and soft oil pipes, with easy installation;
3) Uses multi-shaft rotating and compulsory feeding, which greatly improves the density and intensity of the blocks, and reduces the feeding time as well;
4) Integrated structure of vibrating and moulding platforms, which reduces the weight of the machine, and improves the vibrating efficiency;
5) Uses double-line aero vibration-proof system, which reduces the vibrating force on the mechanical parts, improves the using lifetime of the machine, and reduces the noise;
6) High-precision guide bearings are used to assure the precise movement between the tamper head and the mould;
7) Heavy-duty machine frame, which uses high-intensity steel and advanced heat treatment, is wear resistant.

Raw Material:
sand, gravel, stone, cement, can add a lot of fly ash, slag, steel slag in coal gangue, ceramic, perlite, construction waste, domestic waste and other industrial waste,etc.

Advantages:
-Only 3 persons can perform the whole production line, feeding material, controlling the central control system, driving the forklift.
-Adopt the Siemens PLC control system.
-Produce brick about 14400~19200pcs/8 hours.
-brick moulds can be selected by customers' requirements.

QT6-15 Block machine

QT6-15 automatic complete block forming machine is completely controlled by PLC system. By operating its computer interface, the random signal analysis, fault diagnosis and parameter setting-up of all kinds of materials can be achieved easily.

The material stock hopper and the material feeding hopper are separated, to each other, for the purpose of quantitative feed of materials, which can effectively control the advance liquidation of some concrete and reduce the feeding time.

Its unique material-feeding device can quickly and evenly discharge the materials into the moulding box so that the weight error in finished products can be reduced to the minimum.

For its frame structure, super-strong shaped steel bars are used; For its electronic and hydraulic systems, most the important elements are imported. So, all of these have ensured the stability and reliability of the machine in long term of operation.

This machine has good applicability, it not only can be used for producing concrete blocks of high strength, but also for pulverized coal ash bricks. Cinder bricks, mine slag blocks, and so on. Only by changing different moulds and dies, the hollow blocks and solid blocks of different specifications.

Full Automatic Cement Brick Making Machine

Features of Full Automatic Cement Brick Making Machine

1.Crank link is mechanism is employed. It transmits the circular motion of crank into thestraight reciprocating motion of the mobile frame, this ensure the pallet moving smoothly and transmitting products stably.

2.The upper and lower slider are made of thick plates. The column sleeve and slider are connected by screw, which makes it is convenient to change the copper bushing.

3. Steel alloy components firm and durable 360 degree rotation feeding fall fast materials
can distribute evenly.

4. As for the movement parts of the stacker, we use swing link. This transmits the circular
motion of the swing stem into the straight reciprocating motion of the mobile frame. The pallet
will uniformly accelerate and move smoothly, which makes its easy to operate.

5. PLC and touching screen are products from Siemens, German.One electronic cabin control
both the block making machine and the stacker, which makes it easy to operate and perform
failure diagnosis.

6. The hydraulic units used Youshun, Taiwan, which ensure the good performance of the machine

7. The machine frame is welded by using special thick walled rectangle welding method. The
transmission shaft and gears are made of alloy steel which makes them much stronger and more
durable

8.The lift motor of the stacker employs with cone form motors, the lift chain using 16A chains
which bear weight up to 6T. The machine plate is welded by using special thick walled rectangle
welding method, which makes the machine plate more stable.

HQTY9-15 Block/Brick making machine i

HQTY9-15 Block/Brick making machine is a multi-function block machine, such as hollow block making machine, solid block making machine, interlock making machine and paver block making machine. What's more it can make all kinds block, just only change the mould. Adopting table vibration plus head press vibration (the head press has three oil cylinders) to imorove the block of density and intensity. Using the Mitsubishi PLC and touch screen controller come from Japan and Taiwan, self diagnosed for trouble shooting.



 1. Automatic weighing system
 2. Twin shaft compulsory mixer
 3. Mitsubishi PLC, Touch screen control unit
 4. Hydraulic proportional relief valve automatically adjust the oil flow and speed
 5. Heave duty frame of steel structure for heave working
 6. Mould heat treatment with wire cutting
 7. One production line can make all kinds block, just only change the mould

Specification

Production:                                          9pcs/mould, 13,000pcs/8 hours(Hollow block:400x200x200mm)
                                                              5pcs/mould, 37,000pcs/8 hours(interlock:240x130x60mm)
                                                              50pcs/mould, 75,000pcs/8 hours(solid block:240x115x53mm)
                                                              33pcs/mould, 49,000pcs/8 hours(paver block:200x100x60mm)
working cycle time :                           15-20s
Main machine dimension:                 3560x2600x2950mm
Main machine weight:                       10.5t
Main machine power:                        42kw
Vibration machine force:                  70kn
Pallet size:                                          1350x720x30mm
Factory area:                                       800 square meters

T4-20 paving brick making machine,interlocking concrete paver machines made in china

T4-20 paving brick making machine,interlocking concrete paver machines made in china
1.the hydraulic power system is very dependable
2.the machine can product several kinds of bricks
3.the bricks have pleasing appearance and excellent quality
4.the bricks have high density
5.The bricks can be piled up directly

Technical parameters:

Block machine Technical parameters
Molding	4Pcs/mould
Hydraulic pressure	16MPa
Productivity	720~960Pcs/h
Total power	27.5KW
Total mass	6.6T
Molding cycle	20s
The size of the pallet	1020*570mm
Main Vibration Form	Platform Vibration
Vibration Frequency	4600 ( r/min)

Main production specification and theoretical productivity

item	Specification size(mm)	Quantity per mold	Cycle molding	Per hour
Hollow brick	400*200*200	4pcs	15~20s	720~960pcs
Porous block	240*115*90	14pcs	15~20s	2520~3360pcs
Standard brick	240*115*53	28pcs	15~17s	5930~6720pcs

QMY automatic block making machine

 Automatic block making machine
Model

	QMY4-45
Power	6.65KW
Cycle	45S for one sheet
Overall Size	1350×1300×1650mm
weight	1000kg
product capacity	400*200*200 4pcs/mould  2500pcs/8h
	400*150*200  5pcs/mould  3200pcs/8h
Frequency	max.3000r/m

Package & shipping:

Our Services:

How to order:

A:Please send us your purchase order by E-mail or Fax, or you can ask us to send you Proforma Invoice for your order.

We need to know the following information for your order:

1) Product information: material, sizes, Application, Price Item, Destination Port

2) Delivery time required.

3) Shipping information: Company name, Address, Phone number, Destination seaport/airport.

Why buy from us?
1. Superior quality and reasonable price.

2. Send out fast--our goods will be sent out once you make a payment.

3.Professional--we are experts in optical source, development,methods, and handling.

4. Best  service--we will answer your questions as soon as possible and try our best to provide you best service.

Most important is--we will satisfy your reasonable requirement and

manufacture in professional way.