JKY55 brick making machine

Product characteristic

JKY55/50-35 brick making machine is an extruding & shaping device for hollow brick production line. It is suitable for hollow bricks with highly ratios hole, sintering bricks highly contained fly ash, low plastic glues soil brick, as well as the production of gangue and shale bricks. It enjoys many advantages: structure novel, technique advanced, high extruding, big capacity, highly vacuum degree, so it can instead of imported equipment. It is controlled by air clutch and is sensitive, convenient and reliable. It has been named excellent product by national authority department. It is exported to Bangladesh, Sudan, Egypt and so on, and gaining the high appreciation. 

Operation and Precautions of JKY55/50-35 brick machine: 
1. This brick machine opening, core head, core rod should be replaced and adjusted in time. While they are abraded to some extent, the sizes of tile will be affected in clay brick production line.
2. The wearing parts should be repaired and replaced when they are abraded after a period of use, or the product quality and output will decline, such as reamers, stirring blades and mud pressing board.
3. When you want to stop the machine, stop feeding first, and then squeeze out the clay inside the machine, in order to avoid the overload at next startup. Don't reboot the machine if the air pressure is lower than 0.5MMpa. The friction plate is easily burnt if the air pressure is not enough in clay brick production line.
4. The machine and all the bolts should be stopped and checked after six to eight hours' work for the first time to make sure if there is looseness. If yes, fasten them in time. If the machine is stopped for more than one day, all the clay material should be squeezed and cleaned out, trying to avoid the damage by the dry clay.