Automatic concrete block making machine QT10-15 (008613119147931)

1. automatic concrete block making machine QT10-15 main advantages

(1) Full automatic and hydraulic automatic block making machine , can produce all kinds of bricks, and just change the moulds, such as the solid bricks, hollow blocks, paver blocks and so on.
(2) German Siemens motors
(3) Japan Mitsubishi PLC
(4) Omron travel switch
(5) The moulds: We adopt the heat treatment technique to increase the lifespan of the moulds
(6) Certificates: SGS/CE/ISO9001 2008
(7) Mould heat treatment & carburization technology
(8) Strong High-Strength Steel Structure

2.automatic concrete block machine QT10-15 Main technical parameters

Dimension of host machine	3500×2220×2850mm	Host machine power	45.38KW
Moulding area	1025×810mm	Vibration force	100KN
Moulding period	15-25S	Mixer model	JS750
Pallet size	1350×900×30mm	General water Consumption	12T/every day
Weight of the host machine	14T	Voltage	Clients local Industrial voltage

1)The workshop area: 200m2
2)The office, curing area and stacking area to arrange according your fact status.
3)Worker requirement: From loading material to transport finished block we need about 5-6 person to operate the whole line.

3.automatic concrete block making machine QT10-15 production

Size(LxWxH)	Pcs/Mould	Pcs/ Hr	Pcs/8hours
400X200X200	10	1500-1800	12000-15000
400X100X200	20	3000-3600	24000-30000
225X112.5X60	27	4050-4500	32400-36000
250X60	14	2100-2400	16800-20000
200X100X60	35	5250	42000
200X165X60	20	3000	24000
250x250x60	8	1200-1650	9600--13200

4. Raw Materials, Sources and Availability.

1) Fly-Ash:

this Raw material is freely available in Thermal Power plants. There are no taxes on this itemwhatsoever. Transportation charges are only to be attended by the entrepreneur.


2)Lime/OPC:

Lime used in this process is known as Hydrated Lime, which can be obtained by Calcining Burnt Lime. One KG of Burnt Lime gives 2.2 Kgs of Hydrated Lime after Calcining. Brunt Lime can be obtained from Kuddur, Andhra Predesh where Lime Kilns and High Quality Brunt Lime are pettily available. Alternativily Hydrated lime is available as an industrial by-product of Paper Mills

3)Gypsm:

This too is an industrial waste. This is available at Fertilizer Plant as in industrial wastes

4)Sand / Crusher Dust.

Sand is used as an economizer and to increase the strength of bricks to some extant. Sand is procured locally. Crusher dust can also be successfully used in place of sand.

TECHNOLOGICAL PARAMETERS OF THE CONCRETE BLOCK PRODUCTION LINE

TECHNOLOGICAL PARAMETERS OF THE CONCRETE BLOCK PRODUCTION LINE

DESCRITION OF THE PLC
1. Programmable Logic Controller (PLC) is designed with the up-to-date technology with high

reliability and function, which is one of the mainstays in the world industrial automatic technology.

2. The heart part of this machine is adopted the up-to-date technology from Japanese OMRON. The PLC is a micro-computer and CQMIH type machine is with anti-interference ability and load ability.

3. It is easy to operate and is reliable. The self-diagnostic program helps you to find out the breakdown of the PC system by the indicator (lighting up, blinking and lighting off) on the PC panel.



DESCRITION OF THE HYDRAULIC POWER UNIT:

1. The hydraulic oil needed: Both No.46 and No. 68 can be used .No.46 hydraulic oil is mainly used in    the area with high temperature while the No. 68 hydraulic oil is mainly used in the area with low temperature. (Note: it is better to use No. 46 hydraulic oil in the Middle East)

2. Some important parts of the hydraulic power unit



3. Advantage

The double oil pump can make sure that the hydraulic power unit can work smoothly even if there are some problems on one oil pump, thus to protect the whole hydraulic power unit.

4. Double Cooling System
We adopt wind and water double cooling system on our hydraulic power unit thus to make sure the temperature of hydraulic oil can be controlled within the required range, if the temperature of hydraulic oil is too high it will then damage the oil pipe and slow down the movement of machine. Please pay attention to the picture of our hydraulic power unit.

Machine de fabrication de briques en ciment (brickmachine1984@gmail.com)

Description de la machine de fabrication de briques QTF10-15


1. Cette briqueteuse peut distribuer les matières sur différentes couches. Elle convient à fabriquer divers blocs colorés destinés aux voies piétonnes. Grâce au système de distribution sur différentes couches, cette machine de fabrication de blocs peut produire des briques bicolores pour le pavage.

2. Elle conserve les facultés et les fonctions du modèle QT10-15, de plus, elle est dotée d'un système automatique de distribution des matières sur différentes couches (ce système peut être mobile). On doit simplement le connecter avec la machine (seulement quelques minutes sont nécessaires) pour fabriquer des briques colorées. Munie de diverses distributions secondaires, la quantité distribuée dans chaque couche est ajustable, distribution uniforme et précise.

3. Le contrôle à haute précision peut économiser les matières premières et rendre les pavés de béton superbes.

4. C'est un outil pratique pour la construction des routes, des places, des bâtiments et des aéroports, etc.

Detailed introduction of conrete block making machine (brickmachine1984@gmail.com)

 Detailed introduction of conrete block making machine

Our concrete block making machine is the core machine used for producing blocks/bricks.The technology is introduced from German . This machine is automatic and multi-functional. It can produce large varieties and various sizes of products. It can produce concrete blocks, bricks, hollow block, insulated block, solid bricks, paving slabs, interlocking pavers, paving stone, retaining stone, curb stone etc.. You just need to replace the mould. The moulds are designed according to your requirement.



Concrete block making machine  is automatic and operated by the PLC controller. The main electrical appliances all use foreign famous brands such as the Transducer (Japanese Panasonic), Breaker and Contactor (Japanese Fujiand Panasonic), Relay and Industrial computer (Japanese Fuji), Button(Germany Siemens) etc.




DESCRITION OF CONVEYOR BELT:



The conveyor belt has 5 layers and 12 mm thickness so it is very Strong, thus to make sure it has a long life.



DESCRITION OF MOULD



The mold is made of 16 manganese, not the cast steel (No. 45 steel), also not common A3 iron plate as some companies) and will be processed by the heat treatment which will prolong its life (the mold can be used for 150,000 times) (MOST COMPANIES IN QUANZHOU CAN ONLY USED FOR 100,000 TIMES)



Guarantee:



We will send you spare parts together with shipment for one year use free of charge started from successful installation date, and during one year if any broken, we will send the intact parts to you for free too.